57
Classifier: 2
Operator: AND
Rule(s) :
If-match protocol ipv6
Behavior: 2
Accounting enable:
0 (Packets)
Filter enable: Permit
Marking:
Remark dscp 3
Classifier: 3
Operator: AND
Rule(s) :
-none-
Behavior: 3
-none-
Table 20 Command output
Field Description
Direction Inbound direction on the control plane.
Green packets Statistics about green packets.
Yellow packets Statistics about yellow packets.
Red packets Statistics about red packets.
For the description of other fields, see Table 15 and Table 18.
display qos policy control-plane pre-defined
Use display qos policy control-plane pre-defined to display predefined control plane QoS
policies.
Syntax
display qos policy control-plane pre-defined [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays predefined control plane QoS policies for all member devices.
Examples
# Display the predefined control plane QoS policy of slot 1.
<Sysname> display qos policy control-plane pre-defined slot 1
Pre-defined policy information slot 1
Protocol Priority Bandwidth Group
To Next Page
Loading...
