89
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify
an interface, this command displays the WFQ configuration of all interfaces.
Examples
# Display the WFQ configuration of Ten-GigabitEthernet 1/0/1.
<Sysname> display qos wfq interface ten-gigabitethernet 1/0/1
Interface: Ten-GigabitEthernet1/0/1
Output queue: Hardware Weighted Fair Queuing
Queue ID Queue name Group Byte count Min Bandwidth
--------------------------------------------------------------------------------
0 be 1 1 0
1 af1 1 1 0
2 af2 1 1 0
3 af3 1 1 0
4 af4 1 1 0
5 ef 1 1 0
6 cs6 1 1 0
7 cs7 1 1 0
Table 35 Command output
Field Description
Interface Interface type and interface number.
Output queue Type of the current output queue.
Group
Number of the group that holds the queue. By default, all queues are in
group 1.
Byte-count Byte-count scheduling weight of the queue.
Min Bandwidth Minimum guaranteed bandwidth for the queue.
qos bandwidth queue
Use qos bandwidth queue to set the minimum guaranteed bandwidth for a queue on an interface.
Use undo qos bandwidth queue to restore the default.
Syntax
qos bandwidth queue queue-id min bandwidth-value
undo qos bandwidth queue queue-id
Default
The minimum guaranteed bandwidth for a queue is 0 kbps.
Views
Layer 2/Layer 3 Ethernet interface view
Predefined user roles
network-admin
To Next Page
Loading...
