70
Parameters
slot slot-number: Specifies an IRF member device by its member ID.
Examples
# Clear the statistics of the QoS policy applied to the control plane of slot 3.
<Sysname> reset qos policy control-plane slot 3
reset qos policy global
Use reset qos policy global to clear the statistics of a global QoS policy.
Syntax
reset qos policy global [ inbound | outbound ]
Views
User view
Predefined user roles
network-admin
Parameters
inbound: Clears the statistics of the global QoS policy applied to incoming traffic globally.
outbound: Clears the statistics of the global QoS policy applied to outgoing traffic globally.
Usage guidelines
If you do not specify a direction, this command clears the statistics of the global QoS policies in both
directions.
Examples
# Clear the statistics of the global QoS policy applied to the incoming traffic globally.
<Sysname> reset qos policy global inbound
reset qos vlan-policy
Use reset qos vlan-policy to clear the statistics of the QoS policy applied in a certain direction of a
VLAN.
Syntax
reset qos vlan-policy [ vlan vlan-id ] [ inbound | outbound ]
Views
User view
Predefined user roles
network-admin
Parameters
vlan vlan-id: Specifies a VLAN ID in the range of 1 to 4094.
inbound: Clears the statistics of the QoS policy applied to the incoming traffic of the specified VLAN.
outbound: Clears the statistics of the QoS policy applied to the incoming traffic of the specified
VLAN.
To Next Page
Loading...
