107
Parameters
car-name: Specifies an aggregate CAR action by its name. This argument must start with a letter,
and is a case-sensitive string of 1 to 31 characters. If you do not specify an aggregate CAR action,
this command displays information about all aggregate CAR actions.
Examples
# Display information about all aggregate CAR actions.
<Sysname> display qos car name
Name: a
Mode: aggregative
CIR 32 (kbps) CBS: 2062 (Bytes) PIR: 888 (kbps) EBS: 0 (Bytes)
Green action : pass
Yellow action : pass
Red action : discard
Slot 0:
Green packets : 0 (Packets), 0 (Bytes)
Yellow packets: 0 (Packets), 0 (Bytes)
Red packets : 0 (Packets), 0 (Bytes)
Slot 1:
Green packets : 0 (Packets), 0 (Bytes)
Yellow packets: 0 (Packets), 0 (Bytes)
Red packets : 0 (Packets), 0 (Bytes)
Slot 2:
Apply failed
Table 41 Command output
Field Description
Name Name of the aggregate CAR action.
Mode Type of the CAR action, which can be
aggregative
.
CIR CBS PIR EBS Parameters for the CAR action.
Green action
Action to take on green packets:
• discard—Drops the packets.
• pass—Permits the packets to pass through.
Yellow action
Action to take on yellow packets:
• discard—Drops the packets.
• pass—Permits the packets to pass through.
Red action
Action to take on red packets:
• discard—Drops the packets.
• pass—Permits the packets to pass through.
Green packet Statistics about green packets.
Yellow packet Statistics about yellow packets.
Red packet Statistics about red packets.
qos car
Use qos car aggregative to configure an aggregate CAR action.
To Next Page
Loading...
