72
Priority mapping commands
Priority map commands
display qos map-table
Use display qos map-table to display the configuration of priority maps.
Syntax
display qos map-table [ dot1p-dp | dot1p-exp | dot1p-lp | dscp-dot1p | dscp-dp | dscp-dscp |
exp-dot1p ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
The device provides the following types of priority map.
Table 26 Priority maps
Priority mapping Description
dot1p-dp 802.1p-drop priority map.
dot1p-exp 802.1p-EXP priority map.
dot1p-lp 802.1p-local priority map.
dscp-dot1p DSCP-802.1p priority map.
dscp-dp DSCP-drop priority map.
dscp-dscp DSCP-DSCP priority map.
exp-dot1p EXP-802.1p priority map.
Usage guidelines
If you do not specify a priority map, this command displays the configuration of all priority maps.
Examples
# Display the configuration of the 802.1p-local priority map.
<Sysname> display qos map-table dot1p-lp
MAP-TABLE NAME: dot1p-lp TYPE: pre-define
IMPORT : EXPORT
0 : 2
1 : 0
2 : 1
3 : 3
4 : 4
5 : 5
To Next Page
Loading...
Need help?
General