HPE FlexFabric 5940 SERIES

18
Syntax
reset acl [ ipv6 | mac ] counter { acl-number | all | name acl-name }
Views
User view
Predefined user roles
network-admin
Parameters
ipv6: Specifies the IPv6 ACL type.
mac: Specifies the Layer 2 ACL type.
acl-number: Specifies an ACL by its number.
• 2000 to 2999 for basic ACLs.
• 3000 to 3999 for advanced ACLs.
• 4000 to 4999 for Layer 2 ACLs.
all: Clears statistics for all ACLs of the specified type.
name acl-name: Clears statistics of an ACL specified by its name. The acl-name argument is a
case-insensitive string of 1 to 63 characters.
Usage guidelines
To specify the IPv4 ACL type, do not specify the ipv6 or mac keyword.
Examples
# Clear statistics for IPv4 basic ACL 2001.
<Sysname> reset acl counter 2001
Related commands
display acl
reset packet-filter statistics
Use reset packet-filter statistics to clear the packet filtering statistics and accumulated statistics for
an ACL.
Syntax
reset packet-filter statistics interface [ interface-type interface-number ] { inbound | outbound }
[ [ ipv6 | mac ] { acl-number | name acl-name } ]
Views
User view
Predefined user roles
network-admin
Parameters
interface [ interface-type interface-number ]: Specifies an interface by its type and number. If you do
not specify an interface, this command clears packet filtering statistics for all interfaces.
inbound: Specifies the inbound direction.
outbound: Specifies the outbound direction.
ipv6: Specifies the IPv6 ACL type.