83
Congestion management commands
Common commands
display qos queue interface
Use display qos queue interface to display the queuing information for interfaces.
Syntax
display qos queue interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify
an interface, this command displays the queuing information for all interfaces.
Examples
# Display the queuing information for all interfaces.
<Sysname> display qos queue interface
Interface: FortyGigE9/0/1
Output queue: Weighted Round Robin queuing
Queue ID Queue name Group Byte count
---------------------------------------------------
0 be 1 1
1 af1 1 2
2 af2 1 3
3 af3 1 4
4 af4 1 5
5 ef 1 9
6 cs6 1 13
7 cs7 1 15
Interface: FortyGigE9/0/2
Output queue: Weighted Round Robin queuing
Queue ID Queue name Group Byte count
---------------------------------------------------
0 be 1 1
1 af1 1 2
2 af2 1 3
3 af3 1 4
4 af4 1 5
5 ef 1 9
6 cs6 1 13
To Next Page
Loading...
