82
Default
No rate limit is configured on an interface or PW.
Views
Layer 2/Layer 3 Ethernet interface view
Predefined user roles
network-admin
Parameters
inbound: Limits the rate of incoming packets.
outbound: Limits the rate of outgoing packets.
cir committed-information-rate: Specifies the CIR in kbps. The committed-information-rate argument
has the following value ranges:
• 8 to 10485760 for 10-GE interfaces.
• 8 to 41943040 for 40-GE interfaces.
• 8 to 104857600 for 100-GE interfaces.
The specified value must be an integral multiple of 8.
cbs committed-burst-size: Specifies the CBS in bytes. The value range for committed-burst-size is
512 to 134217728, in increments of 512. The default value for this argument is the product of 62.5
and the CIR and must be an integral multiple of 512. When the product is not an integral multiple of
512, it is rounded up to the nearest integral multiple of 512 that is greater than the product. A default
value greater than 134217728 is converted to 134217728.
Examples
# Limit the rate of outgoing packets on Ten-GigabitEthernet 1/0/1, with CIR 256 kbps and CBS 51200
bytes.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] qos lr outbound cir 256 cbs 51200
To Next Page
Loading...
