46
Examples
# Configure a traffic filtering action as deny in traffic behavior database.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] filter deny
nest top-most
Use nest top-most to configure an outer VLAN tag adding action in a traffic behavior.
Use undo nest top-most to restore the default.
Syntax
nest top-most vlan vlan-id
undo nest top-most
Default
No outer VLAN tag adding action is configured.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
vlan-id vlan-id: Specifies the VLAN ID to be added in the outer VLAN tag, in the range of 1 to 4094.
Usage guidelines
If a QoS policy contains an outer VLAN tag adding action, apply it only to the incoming traffic of an
interface.
If you execute the nest top-most command multiple times in the same traffic behavior, the most
recent configuration takes effect.
Examples
# Configure traffic behavior b1 to add an outer VLAN tag with VLAN ID 123.
<Sysname> system-view
[Sysname] traffic behavior b1
[Sysname-behavior-b1] nest top-most vlan 123
redirect
Use redirect to configure a traffic redirecting action in a traffic behavior.
Use undo redirect to restore the default.
Syntax
redirect { cpu | interface interface-type interface-number }
undo redirect { cpu | interface interface-type interface-number }
Default
No traffic redirecting action is configured.
To Next Page
Loading...
