9
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
inbound: Specifies the inbound direction.
outbound: Specifies the outbound direction.
ipv6: Specifies the IPv6 ACL type.
mac: Specifies the Layer 2 ACL type.
acl-number: Specifies an ACL by its number.
• 2000 to 2999 for basic ACLs.
• 3000 to 3999 for advanced ACLs.
• 4000 to 4999 for Layer 2 ACLs.
name acl-name: Specifies an ACL by its name. The acl-name argument is a case-insensitive string
of 1 to 63 characters.
brief: Displays brief statistics.
Usage guidelines
If acl-number, name acl-name, ipv6, or mac is not specified, this command displays packet filtering
statistics for all ACLs.
To specify the IPv4 ACL type, do not specify the ipv6 or mac keyword.
Examples
# Display packet filtering statistics for all ACLs on incoming packets of Ten-GigabitEthernet 1/0/1.
<Sysname> display packet-filter statistics interface ten-gigabitethernet 1/0/1 inbound
Interface: Ten-GigabitEthernet1/0/1
Inbound policy:
IPv4 ACL 2001, Hardware-count
From 2011-06-04 10:25:21 to 2011-06-04 10:35:57
rule 0 permit source 2.2.2.2 0 (2 packets)
rule 5 permit source 1.1.1.1 0 (Failed)
rule 10 permit vpn-instance test (No resource)
Totally 2 packets permitted, 0 packets denied
Totally 100% permitted, 0% denied
IPv4 ACL 2002 (Failed)
MAC ACL 4000
From 2011-06-04 10:25:34 to 2011-06-04 10:35:57
rule 0 permit
IPv6 ACL 2000
IPv4 default action: Deny
MAC default action: Deny
To Next Page
Loading...
