76
Syntax
qos priority priority-value
undo qos priority
Default
The port priority is 0.
Views
Layer 2/Layer 3 Ethernet interface view
Predefined user roles
network-admin
Parameters
priority-value: Specifies a port priority value in the range of 0 to 7.
Examples
# Set the port priority of Ten-GigabitEthernet 1/0/1 to 2.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] qos priority 2
Related commands
display qos trust interface
To Next Page
Loading...
