About This Manual
Please read this technical manual before programming.
Main description for command as below:
This is the first part of command description. Here we propose the command of ASCII code
and its function.
This part describes the command with ASCII code format, HEX., format, and Decimal format.
The range of the variable
The range value is default as decimal digit. For example, 1 ≤ n ≤ 4, “1” and “4” are decimal
digits.
Detailed illustration for the command
Different mode must be with different command. This part explains the interaction details in
different mode.
Other commands which are interrelated or similar with this.
To Next Page
Loading...
Need help?
General
