HPRT TP80K Programming Manual

48
GS v 0 m xL xH yL yH d1....dk
[Name]
Print raster bit image
[Format]
ASCII
GS v 0 m xL xH yL yH d1...dk
Hex
1D 76 30 m xL xH yL yH d1...dk
Decimal
29 118 48 m xL xH yL yH d1...dk
[Range]
0 ≤ m ≤ 3, 48 ≤ m ≤ 51
0 ≤ xL ≤ 255
0 ≤ xH ≤ 255
0 ≤ yL ≤ 255
0 ≤ d ≤ 255
k = ( xL + xH × 256) × ( yL + yH × 256) ( k ≠ 0)
[Description]
Selects raster bit-image mode.
The value of m selects the mode, as follows:
M
Mdoe
Vertical Dot Density
Horizontal Dot Density
0,48
Normal
203 dpi
203 dpi
1,49
Double-width
203 dpi
101 dpi
2,50
Double-height
101 dpi
203 dpi
3,51
Quadruple
101 dpi
101 dpi
xL, xH, select the number of data bytes (xL+xH×256) in the horizontal direction
for the bit image.
yL, yH, select the number of data bits (yL+yH×256) in the vertical direction for
the bit image.
[Notes]
In standard mode, this command is effective only when there is no data in the
print buffer.
The part exceeds printing area is not to be printed.
ESC a (select justification) is effective to raster bit image.
If this command is received while a macro is being defined, the printer ends
macro definition mode and execute it. This command is not part of macro
definition.
d indicates the bit image data. Set a bit to 1 to print a dot, or set a bit to 0 to not
print a dot.
[Example]
When xL+ xH × 256 = 64,

HPRT TP80K Specifications

General

Brand	HPRT
Model	TP80K
Category	Printer
Language	English