HPRT TP80K Programming Manual

2
ESC 3 n
[Name]
Set line spacing.
[Format]
ASCII
ESC 3 n
Hex
1B 33 n
Decimal
27 51 n
[Description]
Sets the line spacing to [n × 0.125 mm].
[Notes]
The line spacing can be set independently in standard mode and in page mode.
[Reference]
n =30
ESC S
[Name]
Selectstandard mode
[Format]
ASCII
E SC
S
Hex
1B
53
[Range]
Decimal
27
83
[Default]
None
[Description]
Switches from page mode to standard mode.
[Notes]
■ This command is enabled only in page mode. Page mode can be selected
by ESC L .
■ When this command is executed, data in all the print areas is cleared,
the print area set by ESC W retu rns to the default value, but the value set
by ESC T is maintained.
■ The following commands switch t he settings for standard mode
because these commands can be set independently in standard mode
and in page mode:
• ESC SP, ESC 2, ESC 3, ESC U, and FS S .
■ In standard mode, CAN, ESC FF, GS $, GS Q and GS \ are ignored.
■ The settings of ESC T and ESC W, GS ( P do not affect printing in standard
mode.
■ The printer selects page mode with ESC L .
■ Standard mode is selected as the default.
[Model-depen
dent variations]
N one

HPRT TP80K Specifications

General

Brand	HPRT
Model	TP80K
Category	Printer
Language	English