HPRT TP80K

4
2 Basic Print Commands
LF
[Name]
Print and line feed.
[Format]
ASCII
LF
Hex
0A
Decimal
10
[Description]
Prints the data in the print buffer and feeds one line, based on the current line
spacing.
[Notes]
This command sets the print position to the beginning of the line.
When this command is processed in page mode, only the print position
moves,and the printer does not perform actual printing.
The printer will return data 0x06 every time a line is printed.
[Reference]
ESC 2, ESC 3
CR
[Name]
Print and carriage return
[Format]
ASCII
CR
Hex
0D
Decimal
13
[Description]
Executes one of the following operations.
Conditions
Function
Allows auto paper feed
Same to LF
Prohibits auto paper feed
and uses serial interface
This command is ignored