HPRT TP80K Programming Manual

73
11 Cutter Commands
ESC i
[Name]
Partial cut (one point left uncut)
[Format]
ASCII
ESC i
Hex
1B 69
Decimal
27 105
[Description]
Printer executes cutting after receiving this command.
ESC m
[Name]
Partial cut (three points left uncut)
[Format]
ASCII
ESC m
Hex
1B 6D
Decimal
27 109
[Description]
Printer executes cutting after receiving this command.
<A>GS V m <B>GS V m n
[Name]
Select cut mode and cut paper
[Format]
<A> ASCII GS V m
Hex 1D 56 m
Decimal 29 86 m
<B> ASCII GS V m n
Hex 1D 56 m n
Decimal 29 86 m n
[Range]
<A> m = 0, 1, 48, 49
<B> m = 65, 66, 0 ≤ n ≤ 255
[Description]
• Executes paper cutting specified by m.
m
Function
<A>
0,48
Full cut (completely cut paper)
1,49
Partial cut (one point left uncut)
<B>
65
Feeds paper to (cutting position + [n×(vertical motion
unit)] and completely cuts paper.
66
Feeds paper to (cutting position + [n×(vertical motion
unit)] and cuts paper with one point left uncut.
[Notes]
• This printer executes a partial cut (one point left uncut).

HPRT TP80K Specifications

General

Brand	HPRT
Model	TP80K
Category	Printer
Language	English