HPRT TP80K

12
ESC a n
[Name]
Set relative horizontal print position.
[Format]
ASCII
ESC a n
Hex
1B 61 n
Decimal
27 97 n
[Range]
0 ≤ n ≤ 248 ≤ n ≤ 50
[Description]
Aligns all the data in one line to the specified position.
n selects the justification as follows:
n
Justification
0,48
Left justification
1,49
Centering
2,50
Right justification
[Notes]
• The command is enabled only when processed at the beginning of the line
in standard mode.
• If this command is input in page mode, the printer performs only internal
flag operations
• This command justifies the space area according to HT, ESC $ or ESC \.
[Default]
N=0
[Example]
Left justification Centering Right justification