HPRT TP80K Programming Manual

67
DLE EOT n
[Name]
Transmit real-time status
[Format]
ASCII
DLE EOT n
Hex
10 04 n
Decimal
16 4 n
[Range]
1 ≤ n ≤ 4
[Description]
Transmits the selected printer status specified by n in real-time, according to
the following parameters:
n = 1: Transmit printer status
n = 2: Transmit offline status
n = 3: Transmit error status
n = 4: Transmit paper roll sensor status
[Notes]
1) Printer back to required status when received the command.
2) Don’t put this command into command sequence which is with 2 Byte or
more.
3) Even printer is prohibited by command ESC = (choose peripherals), this
command is effective.
4) Printer transmitting current status, 1 byte stands for each status
5) Printer transmission value can make sure whether host computer receive or
not.
6) This command is executed once received by printer.
7) When received it, printer execute it under any situation.
n=1:Printer status
Bit
0/1
Hex
Decimal
Function
0
0
00
0
Not used. Fixed to Off.
1
1
02
2
Not used. Fixed to On.
2
0
00
0
Drawer kick-out connector pin 3 is LOW.
1
04
4
Drawer kick-out connector pin 3 is HIGH.
3
0
00
0
Online.
1
08
8
Offline.
4
1
10
16
Not used. Fixed to On.
5
0
00
0
Not waiting for online recovery.
1
20
32
Waiting for online recovery.
6
0
00
0
Paper is not being fed by the paper feed
button.
1
04
64
Paper is being fed by the paper feed
button.
7
0
00
0
Not used. Fixed to Off.

HPRT TP80K Specifications

General

Brand	HPRT
Model	TP80K
Category	Printer
Language	English