HPRT TP80K Programming Manual

20
ESC G n
[Name]
Select double-strike mode
[Format]
ASCII
ESC G n
Hex
1B 47 n
Decimal
27 71 n
[Range]
0 ≤ n ≤ 255
[Description]
Turns double-strike mode on or off.
• When the LSB of n is 0, the double-strike mode is off.
• When the LSB of n is 1, the double-strike mode is on.
[Notes]
• Only the LSB of n is effective.
• Printer output is the same in double-strike and emphasized mode
[Default]
n=0
[Reference]
ESC E
ESC - n
[Name]
Turn underline mode on /off
[Format]
ASCII
ESC - n
Hex
1B 2D n
Decimal
27 45 n
[Range]
0≤ n ≤ 2
48 ≤ n ≤ 50
[Description]
turn underline mode on/off, n value as follows:
n
Function
0, 48
underline mode is turn off
1, 49
underline mode ( one dot width) is turn on
2, 50
underline mode ( two dot width) is turn on
[Note]
This command is effective for all characters (including the blank space), but not
the blank space set by HT.
When underline mode is on, 90°clock wise rotated characters and characters
and white / black reverse characters cannot be underline.
When underline mode is off, there is no underline for following characters.
Underline width stays the same, default width: one dot width.
Character size change has no effects on underline width.
Turn underline mode on / off can be set by ESC !, the command executed at
last is effective.
[Reference]
ESC !

HPRT TP80K Specifications

General

Brand	HPRT
Model	TP80K
Category	Printer
Language	English