HPRT TP80K

77
ESC c 4 n
[Type]
Paper sensor
[Function]
Selecting paper sensor to stop printing
[Format]
ASCII
ESC c 4 n
Hex
1B 63 34 n
Decimal
27 99 52 n
[Range]
0 ≤ n ≤ 255
[Default]
n = 0
[Description]
Select the paper sensor(s) whether to use to stop printing or not when a
paper end is detected.
(n)Bit
Off/On
Hex
Decim
al
Function
0
-
-
-
Undefined.
1
Off
00
0
Roll paper near-end sensor
disabled
On
02
2
Roll paper near-end sensor
enabled.
2-7
Off
00
0
Reserved.
ESC c 5 n
[Name]
Panel button
[Function]
Enable/disable panel buttons
[Format]
ASCII
ESC c 5 n
Hex
1B 63 35 n
Decimal
27 99 53 n
[Range]
0 ≤ n ≤ 255
[Default]
n = 0
[Description]
• Enables or disables the panel buttons.
• When the LSB of n is 0, the panel buttons are enabled.
• When the LSB of n is 1, the panel buttons are disabled.
[Note]
• This command affects the FEED button.
• The FEED button is disabled regardless of the settings with this command,
when the cover is open.