HPRT TP80K

25
5 Chinese Character Commands
FS &
[Name]
Select multi-byte character
[Format]
ASCII
FS &
Hex
1C 26
Decimal
28 38
[Description]
Selects Korean character mode.
[Notes]
For Japanese Korean model:
This command is effective only when the JIS code system is selected.
When the Korean character mode is selected, the printer processes all Korean
code as two bytes each.
Korean codes are processed in the order of the first byte and second byte.
Korean character mode is not selected when the power is turned on.
Using FS C, the Korean character code system is selected.
For Chinese/Taiwanese Korean model:
When The Korean character mode is selected, the printer checks whether the
code is for Korean or not; then processes the first byte and the second byte if
the code is for Korean.
Korean codes are processed in the order of the first byte and second byte.
Korean character mode is not selected when the power is turned on.
[Reference]
FS ., FS C
FS .
[Name]
Cancel multi-byte character
[Format]
ASCII
FS .
Hex
1C 2E
Decimal
28 46
[Description]
Cancels Korean character mode.
[Notes]
For Japanese Korean model:
This command is effective only when the JIS code system is selected.
When the Korean character mode is not selected, all character codes are
processed one byte at a time as ASCII code.
Korean character mode is not selected when the power is turned on.
For Chinese/Taiwanese Korean model:
When the Korean character mode is not selected, all character codes are
processed one byte at a time as ASCII code.
Korean character mode is selected when the power is turned on.
[Reference]
FS &, FS C