Figure 3-80 Installing a TaiShan 200 server
Step 5 Connect the power cable to the TaiShan 200 server.
1. Wear an ESD wrist strap or ESD gloves.
2. Connect one end of the power cable to the cable port on the AC power
module of the server.
Figure 3-81 Connecting the power cable
3. Use a hook-and-loop fastener to secure the power cable.
FusionModule2000-S Smart Modular Data Center
User Manual 3 Hardware Installation
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 97
To Next Page
Loading...
