Huawei FusionModule2000-S

Parameter Description
Link mode Set this parameter to Server.
Server encryption Set this parameter to Enable.
----End
5.2.3 Startup
Initial Startup
NO TICE
● Before startup, ensure that you have downloaded the Service Expert app from
the app store and applied for the permission to use the app. Currently, the
Android operating system is supported.
● After factory settings are restored, startup
verication is required.
Step 1 Tap Start on the home screen to enter the initial startup screen. Tap OK to enter
the startup authorization screen.
Figure 5-17 Initial startup
FusionModule2000-S Smart Modular Data Center
User Manual 5 Power-On Commissioning
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 170