Figure 5-31 WebUI login page
2. On the login page, enter the preset user name admin and preset password
Changeme, set the language, and click Log In.
– After the rst login, change the password in time to ensure account security and
prevent unauthorized network attacks, such as data tampering. The relevant party
will be liable for any security issues caused by the failure to change the preset
password in time or password loss after changing.
– You are advised to change the password periodically.
– Record and keep the password properly. If you forgot the password, you will be
unable to log in to the WebUI.
– When the event notication is congured and the password retrieval mode is
congured under user management, the password can be retrieved.
– You will be logged out after being inactive for 10 minutes.
– A maximum of three users can log in to the ECC800-Pro WebUI at the same time.
----End
5.3.2 Preparations and App Login
Prerequisites
App operating environment requirements:
● The mobile device runs Android 6.0 or later and the operating system is not
rooted.
● The mobile device has
sucient battery reserve.
● You have obtained the IP address of the ECC800-Pro as well as the user name
and password for WebUI login.
Procedure
Step 1 Download and install the FusionModule app from Huawei AppGallery.
FusionModule2000-S Smart Modular Data Center
User Manual 5 Power-On Commissioning
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 180
To Next Page
Loading...
Need help?
General