After the server is started properly, the button/indicator of its power switch is displayed
green.
Figure 5-81 Power button on the 2288X V5 server
Figure 5-82 TaiShan 200 server power button
----End
5.3.14.6 Logging In to the NetEco Client
Prerequisites
● The network connection between your PC and the client IP address of the
NetEco is normal and the function of the O&M plane are running properly.
● You have obtained the user name and password for login.
Procedure
Step 1 In the browser address box, enter https://
IP address of the NetEco server
:31943,
and then press Enter.
● 192.168.8.11 is the default IP address of the NetEco.
● Latest Chrome (Stable Channel) and Firefox (ESR Release) are recommended.
● You are advised to set the display resolution as 1920 x 1080 or higher.
● Make sure that the IP address of the NetEco server is not contained in the compatibility view
website.
Step 2 Enter the User Name, Password, and click Login.
FusionModule2000-S Smart Modular Data Center
User Manual 5 Power-On Commissioning
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 253
To Next Page
Loading...
Need help?
General