Huawei FusionModule2000-S User Manual

5.3.16.2.1 Adding a Management Domain
Before adding a device, you need to create a management domain based on the
planned relationship between the management domain and the device.
Context
The NetEco presets management domains such as parks, equipment rooms,
subnets, cabinets, buildings, and oors.
● If the managed device is FusionModule800 or FusionModule2000, the
management domain to be added is Modular.
● If the managed device is FusionModule500, the management domain to be
added is FusionModule500.
Procedure
Step 1 Choose Device Management > Conguration > Planning Conguration.
Step 2 In the navigation tree, select the node to which you want to add a management
domain.
Step 3 In the Domain area under the navigation tree, drag the management domain to
be added to the conguration area.
Step 4 On the right of the Planning
Conguration page, set Management Info of the
management domain by referring to Basic Parameters of a Management Domain,
and click
in the upper right corner of the page.
NO TE
When creating a management domain, you need to enter Location, Longitude, and
Latitude in the Management Info area. Otherwise, the
specic location of the device
cannot be displayed on the View page.
----End
5.3.16.2.2 Adding Devices by Automatic Discovery
Add ECC800-Pro devices to the management domains of the smart module and
FusionModule500 in automatic discovery mode.
Prerequisites
● Management domains have been created. For details, see 5.3.16.2.1 Adding a
Management Domain.
● You have obtained device parameters.
● The ECC800-Pro is properly connected.
Procedure
Step 1 Choose Device Management >
Conguration > Planning Conguration.
Step 2 On the Planning Conguration page, click in the upper left corner.
FusionModule2000-S Smart Modular Data Center
User Manual 5 Power-On Commissioning
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 266

Huawei FusionModule2000-S Specifications

General

Brand	Huawei
Model	FusionModule2000-S
Category	Storage
Language	English