● Check that the MDU screen displays information properly and communicates
properly.
● After the rst login, change the password in time to improve account security
and prevent unauthorized network attacks, such as data tampering. The
relevant party will be liable for any security issues caused by your failure to
change the preset password in time or password loss after changing.
Table 5-7 Preset passwords
System User Preset Password
admin (system administrator) 000001
operator (common user) 000001
Step 6 Perform quick settings.
Table 5-8 Settings Wizard
Item
Parameter Setting
Language - Set as required.
Data and
Time
Date format Set as required.
YYYY-MM-DD Actual date
Time zone Actual time zone
Time (H:M:S) Actual time
Network
Param.
IP address assign DHCP Automatic
System
Param.
Rated frequency Set as required.
Rated line voltage Set as required.
Step 7 Check whether there is any alarm on the monitoring screen. If there is, clear it.
Step 8 Switch on the input circuit breakers for smart cooling products in the integrated
PDF.
After the input switch in the PDF is turned on, the MDU will report a Branch Disconnected
alarm, which is a normal phenomenon.
Step 9 Switch on the output circuit breakers for smart cooling products in the integrated
PDF to power on the smart cooling products.
FusionModule2000-S Smart Modular Data Center
User Manual 5 Power-On Commissioning
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 145
To Next Page
Loading...
Need help?
General