Table 5-34 Camera conguration parameters
Condition Result
Encoding
Protocol
Resolutio
n
Frame
Rate
I-Frame
Interval
Minimum
Bit Rate
Required
Supporte
d Video
Storage
Duration
(h)
H.265 1080P 25 50 1 Mbit/s 66
H.264 1080P 25 50 1 Mbit/s 66
H.265 720P 25 50 0.8 Mbit/s 75
H.264 720P 25 50 1 Mbit/s 66
H.265 720P 25 50 0.6 Mbit/s 105
H.264 720P 25 50 0.8 Mbit/s 75
5. Import the motion detection algorithm package. Search for the algorithm
package SDC-C16_9.0.0.SPC307_beh.zip on the technical support website,
download the package, and decompress it. Go back to the web system,
choose Maintenance >
Software-dened Camera, and upload the algorithm
package in the Perimeter rmware area.
6. Choose Settings > Intelligent Analysis > Common Intelligence. Select
Enable, click Add, add motion detection areas, set motion detection
parameters, and click Save.
7.
Congure the device alert deployment and alarm linkage policy. Choose
Service > Alarm Service > Alarm Input. Click Intelligent Alarms to access
the Motion page. On the page that is displayed, you can
congure Device
Alert Deployment and Alarm Linkage Policy.
Figure 5-56
Conguring the device alert deployment
FusionModule2000-S Smart Modular Data Center
User Manual 5 Power-On Commissioning
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 220
To Next Page
Loading...
Need help?
General