● Batteries are damaged, fall, leak, or crack due to improper operations or
incorrect connection.
● After being installed and connected to the system, the batteries are not
powered on in time due to reasons attributed to the customer, which causes
damage to the batteries due to overdischarge.
● Batteries are damaged because they are not accepted in time due to reasons
attributed to the customer.
● The customer sets battery operating parameters incorrectly.
● The customer uses
dierent batteries together, causing acceleration of
capacity attenuation. For example, the customer uses our batteries together
with batteries of other vendors or with batteries of
dierent rated capacity, or
old and new batteries are mixed.
● Batteries are frequently overdischarged due to the customer's improper
maintenance, load capacity is expanded without notifying us, or the batteries
have not been fully charged for a long time.
● The customer does not perform battery maintenance based on the operation
guide, such as failure to check battery terminals regularly.
● Batteries are not charged as required during storage due to the customer's
reasons, resulting in capacity loss or other irreversible damages to the
batteries.
● Batteries are damaged due to reasons of the customer or a third party, for
example, they relocate or reinstall the batteries without complying with the
Company's requirements.
● The customer changes the battery use scenarios without notifying the
Company.
● The customer connects extra loads to the batteries.
● The storage period of batteries has exceeded the upper limit.
● The warranty period of batteries has expired.
General Requirements
The category 3 (C3) battery is intended for commercial and industrial application
in the second class environment. Installation restrictions or additional measures
may be needed to prevent interference.
To ensure battery safety and battery management accuracy, use batteries provided
by the Company. The Company is not responsible for any battery faults caused by
batteries not provided by it.
● Before installing, operating, and maintaining batteries, read the battery
manufacturer's instructions and comply with their requirements. The safety
precautions
specied in this document are highly important and require
FusionModule2000-S Smart Modular Data Center
User Manual 1 Safety Information
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 20
To Next Page
Loading...
