Figure 6-26 Removing a temperature sensor
Step 2 Install the spare temperature sensor, bind it to the original position using cable
ties, and connect cables to it.
● When installing temperature sensors, bind the cables behind the sensors to the
cable bridge, keeping them 20 mm away from the sensor probes.
● Temperature sensors must not be in touch with metal parts or cabinets.
● Keep the temperature sensors facing the inside of the cabinets to ensure
accurate measurement of cabinet interior temperatures.
----End
Follow-up Procedure
Check whether the new temperature sensor works properly. If its status is
displayed on the WebUI of the ECC800-Pro, the new temperature sensor works
properly.
FusionModule2000-S Smart Modular Data Center
User Manual 6 Operation and Maintenance
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 320
To Next Page
Loading...
Need help?
General