Huawei FusionModule2000-S

Aisle Containment Installation Checklist
No. Check Item Check Result
1 All components of the aisle containment are
installed.
□ Passed □ Failed
2 All labels are correct, clear, and complete. □ Passed □ Failed
3 There is no foreign matter such as adhesive tape,
cable ties, paper, or packing materials left in and
around the aisle.
□ Passed □ Failed
Cable Installation Checklist
No. Check Item Check Result
1 All cable joints are secured properly, especially the
cable joints of network cables and cables inside
cabinets.
□ Passed □ Failed
2 Exposed parts of cables and cable lugs near the
cable terminals are wrapped with insulation tape
or heat-shrink tubing.
□ Passed □ Failed
3 All wiring terminals are securely installed with at
washers and spring washers and are in good
contact.
□ Passed □ Failed
4 Cables are bound neatly, and cable ties are
secured evenly and properly in the same direction.
□ Passed □ Failed
5 Cables are routed in a way convenient for
maintenance and future capacity expansion.
□ Passed □ Failed
6 All labels at the cable ends are clear. □ Passed □ Failed
7 Excess sections of cable ties are neatly cut. □ Passed □ Failed
8 There is no unnecessary adhesive tape or cable tie
on cables.
□ Passed □ Failed
FusionModule2000-S Smart Modular Data Center
User Manual 7 Appendix
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 332