Huawei Quidway NetEngine 20 series

8 FTP, TFTP and XModem
Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
8-8 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 05 (2010-01-30)
8.4 Configuring the Router to Be the FTP Client
8.4.1 Establishing the Configuration Task
Applicable Environment
Configure FTP to transfer files between the FTP client and the remote server.
Pre-configuration Tasks
Before configuring FTP, complete the following tasks:
z
Powering on the router
z
Connecting the FTP client with the server
Data Preparation
If the router is configured as the FTP client, you need the following data.
No. Data
1 Host name or IP address of the FTP server
2 Port number of the FTP server used to create FTP connection
3 Login username and password
Configuration Procedures
No. Procedure
1 Logging In to the FTP Server
2 Configuring File Transmission Mode
3 Viewing Online Help of the FTP Command
4 Uploading or Downloading Files
5 Managing Directories
6 Managing Files
7 Changing Login Users
8 Disconnecting with FTP
8.4.2 Logging In to the FTP Server
Perform the following on the router that serves as the client as required:
In different views, the connection methods set up with the FTP server are different.