10 Router Maintenance
Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
10-8 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 05 (2010-01-30)
System start up mode is warm
Uptime is 0day, 0hour, 30minutes
Startup time : 2007/03/28 13:48
Huawei Versatile Routing Platform Software
1024M bytes SDRAM
64M bytes FLASH
512K bytes NVRAM
Pcb Version : VER.B
Bridge Version : VER.A
RPE Logic Version : 017
SBG Logic Version : 034
HAC Logic Version : 015
Small BootROM Version : 1.54
Big BootROM Version : 5.04
Software Version : VRP (R) Software, Version NE20E-VRP5.30-25111001
Slot8: 1CE3 (pcb)C (logic)002 (board)RTB21CE3
Uptime is 0day, 0hour, 26minutes
Startup time : 2007/03/28 13:52
Master Npu (11,NPU1)'s version information:
Uptime is 0day, 0hour, 30minutes
Startup time : 2007/03/28 13:48
Pico code Version : 0
Pcb Version : VER.B
512M bytes DRAM
AGR Logic Version : 060
Slave Npu(12,NPU2)'s version information:
Uptime is 0day, 0hour, 30minutes
Startup time : 2007/03/28 13:48
Pico code Version : 0
Pcb Version : VER.B
512M bytes DRAM
AGR Logic Version : 060
Backboard Pcb Version : VER.A
Using the preceding command, you can also check the version information of the board in
specified slot. For example:
<Quidway> display version 4
Slot4: 8CE1 (pcb)C (software)000 (logic)001 (board)RTM18CE1B
10.4.3 Displaying the Restart Information of RPU
NE20 contains only one RPU, so NE20 does not support the slave-restart parameter in this chapter.
Run:
display system { restart | slave-restart }
The restart history of the RPU is checked.
Using the preceding command, you can check the restart history of RPU. For example:
<Quidway> display system restart
Reason of system reboot:
To Next Page
Loading...
Need help?
General
