8 FTP, TFTP and XModem
Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
8-14 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 05 (2010-01-30)
Configuration Procedures
No. Procedure
1 Configuring the Basic ACL
2 Configuring the Basic TFTP ACL
8.6.2 Configuring the Basic ACL
Do as follows on the router that serves as the TFTP client:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
acl acl-number
The ACL view is displayed.
Step 3 Run:
rule [ rule-id ] { deny | permit } [ source { | source-ip-address { source-wildcard |
0 } | any } | time-range time-name | vpn-instance vpn-instance-name ]
The ACL rule is configured.
----End
TFTP supports only the basic ACL rules.
8.6.3 Configuring the Basic TFTP ACL
Do as follows on the router that serves as the TFTP client:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
tftp-server [ ipv6 ] acl acl-number
ACL is used to limit the access to the TFTP server.
----End
To Next Page
Loading...
Need help?
General
