Quidway NetEngine20/20E
Configuration Guide - Basic Configurations 9 Telnet and SSH
Issue 05 (2010-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-9
Configuration Procedures
No. Procedure
1
Creating an SSH User (Optional)
2 Configuring SSH for the VTY User Interface
3 Generating a Local RSA Key Pair
4 Configuring the Authentication Mode for SSH Users
5 Configuring the Basic Authentication Information for SSH Users (Optional)
6 Authorizing SSH Users Through the Command Line (Optional)
7 Configuring the Service Type of SSH Users
8 Configuring the Authorized Directory of SFTP Service for SSH Users (Optional)
9 Checking the Configuration
9.3.2 Creating an SSH User
Do as follows on the login router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ssh user user-name
The SSH user is created.
If the SSH user that has the authentication mode of password or password-rsa is created, you
need to create a local user that has the same name in the AAA view.
1. Run:
aaa
The AAA view is displayed.
2. Run:
local-user username password {cipher| simple } password
The local user is created.
----End
If the SSH user is not created separately, you can create the SSH user when performing the following
configurations:
To Next Page
Loading...
Need help?
General
