Quidway NetEngine20/20E
Configuration Guide - Basic Configurations 12 Patch Management
Issue 05 (2010-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12-7
Pre-configuration Tasks
None.
Data Preparation
None.
Configuration Procedures
No. Procedure
1 Deactivating the RPU Patch
12.5.2 Deactivating the RPU Patch
Do as follows on the router to be upgraded.
Run:
patch deactive [ slave | all ]
The RPU patch is deactivated.
12.6 Unloading the RPU Patch
12.6.1 Establishing the Configuration Task
Applicable Environment
When upgrading the system software or installing a new patch, you need to delete the running
patch.
You can delete a patch of any status.
Pre-configuration Tasks
None.
Data Preparation
None.
Configuration Procedures
No. Procedure
1 Deleting the RPU Patch
To Next Page
Loading...
Need help?
General
