5 User Management
Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
5-16 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 05 (2010-01-30)
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
local-user user-name password { simple | cipher } password
The local user account is created.
----End
5.4.3 Configuring the Service Type of the Local User
Do as follows on the broadband access router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
local-user user-name service-type { ftp | ppp | ssh | telnet | terminal } *
The service type of the local user is configured.
----End
By configuring the service type of the local user, you can manage the user based on service types.
5.4.4 Configuring FTP Directory Authority of the Local User
Do as follows on the broadband access router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
local-user user-name ftp-directory directory
To Next Page
Loading...
