Quidway NetEngine20/20E
Configuration Guide - Basic Configurations 4 Basic Configuration
Issue 05 (2010-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-3
Data Preparation
To configure basic system environment, you need the following data.
No. Data
1 Language mode
2 System time
3 Host name
4 Password for switching user levels
5 Command level
6 Login information
Configuration Procedures
No. Procedure
1 Switching Language Mode
2 Configuring the Device Name
3 Configuring the System Clock
4 Configuring the Header Text
5 Configuring the Password for Switching User Levels
6 Switching User Levels
7 Locking the User Interface
8 Configuring Command Privilege Levels
9 Displaying System Status Messages
4.2.2 Switching Language Mode
Do as follows on the router:
Run:
language-mode { chinese | english }
The language mode is switched.
By default, the English mode is used. The help information on the router can be in English
and in Chinese. When you need the help information in Chinese, run this command to switch
the language mode.
To Next Page
Loading...
Need help?
General
