5 User Management
Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
5-14 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 05 (2010-01-30)
5.3.4 Setting Username and Password for AAA Local
Authentication
Do as follows on the router that the user logs in to:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface [ ui-type ] first-ui-number [ last-ui-number ]
The user interface view is displayed.
Step 3 Run:
set authentication password { cipher | simple } password
The password of the local authentication is set.
Step 4 Run:
system-view
The system view is displayed.
Step 5 Run:
aaa
The AAA view is displayed.
Step 6 Run:
local-user user-name password { simple | cipher } password
The local username and the password are configured.
----End
5.3.5 Configuring the User Priority
Refer to the Quidway NetEngine20/20E Series RoutersConfiguration Guide - Security.
5.3.6 Checking the Configuration
Run the following commands to check the previous configuration.
Action Command
Check the user information. display users [ all ]
Check the information of local users.
display local-user
Check the information of the access users.
display access-user
To Next Page
Loading...
Need help?
General
