9 Telnet and SSH
Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
9-6 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 05 (2010-01-30)
In the interactive session, the server and the client encrypt and decrypt the data with the
session key.
9.2 Configuring Telnet Terminal Services
9.2.1 Establishing the Configuration Task
Applicable Environment
When you log in to a router through Telnet to manage or maintain the router, configure the
Telnet terminal services.
Pre-configuration Tasks
Before configuring Telnet terminal services, complete the following tasks:
z
Powering on the router
z
Configuring the IP addresses for interfaces of the router correctly
z
Configuring users, authentication modes and call-in or call-out restrictions
z
Configuring a reachable route between the terminal and the router
Data Preparation
To configure Telnet terminal services, you need the following data.
No. Data
1 IP address of the router
2 VPN instance name
3 IPv4/IPv6 address or host name of the remote router
4 Number of the TCP port that provides Telnet services on the remote router
5 Timeout period of the user interface
Configuration Procedures
No. Procedure
1 Establishing a Telnet Connection
2 Scheduled Telnet Disconnection
3 Checking the Configuration
To Next Page
Loading...
Need help?
General
