4 Basic Configuration
Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
4-4 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 05 (2010-01-30)
4.2.3 Configuring the Device Name
Do as follows on the router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
sysname host-name
The device name is set.
----End
You can change the name of the router that appears in the command prompt.
4.2.4 Configuring the System Clock
Do as follows on the router:
Step 1 Run:
clock datetime HH:MM:SS YYYY-MM-DD
The UTC standard time is set.
Step 2 Run:
clock timezone time-zone-name { add | minus } offset
The time zone is set.
Step 3 Run:
clock daylight-saving-time time-zone-name one-year start-time start-data end-time
end-data offset
Or:
second | third | fourth | fifth | last } weekday | start-date } end-time { end-year month
{ first | second | third | fourth | fifth | last } weekday | end-date } offset
The daylight time is set.
----End
To guarantee cooperation with other devices, you need to accurately set the system time. The
product supports setting the time zone and daylight time.
4.2.5 Configuring the Header Text
Do as follows on the router:
Step 1 Run:
system-view
To Next Page
Loading...
Need help?
General
