Quidway NetEngine20/20E
Configuration Guide - Basic Configurations 9 Telnet and SSH
Issue 05 (2010-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-21
No. Data
6 Preferred HMAC algorithm from the SFTP server to the SSH client
7 Preferred algorithm of key exchange
8 Name of the egress
9 Source address
10 VPN instance name
11 Directory name
12 File name
Configuration Procedures
No. Procedure
1
Configuring the First-Time Authentication on the SSH Client
2 Configuring the SSH Client to Assign the RSA Public Key to the SSH Server
3 Enabling the SFTP Client
4 Managing the Directory
5 Managing the File
6 Displaying the SFTP Client Command Help
7 Checking the Configuration
9.6.2 Configuring the First-Time Authentication on the SSH
Client
See 9.5.2 "Enabling the First-Time Authentication on the SSH Client".
9.6.3 Configuring the SSH Client to Assign the RSA Public Key to
the SSH Server
See 9.5.3 "Configuring the SSH Client to Assign the RSA Public Key to the SSH Server".
9.6.4 Enabling the SFTP Client
Do as follows on the router that serves as the SSH client:
Step 1 Run:
system-view
The system view is displayed.
To Next Page
Loading...
Need help?
General
