9 Telnet and SSH
Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
9-10 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 05 (2010-01-30)
z
Configuring the Authentication Mode for SSH Users
z
Configuring the Service Type of SSH Users
9.3.3 Configuring SSH for the VTY User Interface
Do as follows on the login router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface [ vty ] first-ui-number [ last-ui-number ]
The VTY user interface is displayed.
Step 3 Run:
authentication-mode aaa
The AAA authentication mode is configured.
Step 4 Run:
protocol inbound ssh
The VTY is configured to support SSH.
----End
The authentication mode of the VTY user interface must be configured to AAA. Otherwise, the protocol
inbound ssh command cannot be configured successfully.
9.3.4 Generating a Local RSA Key Pair
Do as follows on the router that serves as the client and the server separately:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
rsa local-key-pair create
A local RSA key pair is generated.
----End
To log in to the SSH server, the local RSA key pair must be configured and generated first. Before the
other configurations of SSH, you must configure the rsa local-key-pair create command to generate a
local key pair.
To Next Page
Loading...
Need help?
General
