Quidway NetEngine20/20E
Configuration Guide - Basic Configurations 9 Telnet and SSH
Issue 05 (2010-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-15
3 Enabling the Earlier Version-Compatible Function (Optional)
4 Configuring the Number of the Port Monitored by the SSH Server (Optional)
5 Enabling the Trap Function (Optional)
6 Configuring the Interval for Updating the Key Pair on the SSH Server (Optional)
7 Checking the Configuration
9.4.2 Enabling the STelnet Service
Do as follows on the login router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
stelnet server enable
The STelnet service is enabled.
----End
9.4.3 Enabling the SFTP Service
Do as follows on the login router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
sftp server enable
The SFTP service is enabled.
----End
9.4.4 Enabling the Earlier Version-Compatible Function
Do as follows on the router that serves as the SSH server:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
To Next Page
Loading...
Need help?
General
