Quidway NetEngine20/20E
Configuration Guide - Basic Configurations 9 Telnet and SSH
Issue 05 (2010-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-29
z
If the password and password-RSA authentication is used, configure a local user of the same user
name.
z
If the RSA, password-RSA, and all authentication is used, the server must save the RSA public key
of the SSH client.
# Configure the VTY user interface.
[Quidway] user-interface vty 0 4
[Quidway-ui-vty0-4] authentication-mode aaa
[Quidway-ui-vty0-4] protocol inbound ssh
[Quidway-ui-vty0-4] quit
z
Create an SSH user Client001.
# Set the password authentication for the SSH user Client001.
[Quidway] ssh user client001
[Quidway] ssh user client001 authentication-type password
# Set the password of the SSH user Client001 to huawei.
[Quidway] aaa
[Quidway-aaa] local-user client001 password simple huawei
[Quidway-aaa]
local-user client001 service-type ssh
[Quidway-aaa] quit
z
Create an SSH user Client002.
# Configure the RSA authentication for the SSH user Client002.
[Quidway] ssh user client002
[Quidway] ssh user client002 authentication-type rsa
Step 3 Configure the RSA public key on the server.
# Generate the RSA public key on the client software.
For the detailed configuration procedures, refer to the related operations of the client software. This is
not mentioned here.
# Generate the local key pair on the client.
<Quidway> system-view
[Quidway] sysname client
[client] rsa local-key-pair create
# Generate the RSA public key on the client.
[client] display rsa local-key-pair public
=====================================================
Time of Key pair created: 16:38:51 2007/5/25
Key name: Quidway_Host
Key type: RSA encryption Key
=====================================================
Key code:
3047
0240
BFF35E4B C61BD786 F907B5DE 7D6770C3 E5FD17AB
203C8FCB BBC8FDF2 F7CB674E 519E8419 0F6B97A8
EA91FC4B B9E18836 5E74BFD5 4C687767 A89C6B43
To Next Page
Loading...
Need help?
General
