4 Basic Configuration
Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
4-8 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 05 (2010-01-30)
The display diagnostic-information command collects all display information of the
following commands, including display clock, display version, display cpu, display
interface, display current-configuration, display saved-configuration, display
history-command.
Displaying the Restarting Information of the RPU
Perform one or both of the following commands as required:
z
Run the display system restart command to display the restarting information about the
AMB for the last 10 times.
z
Run the display system slave-restart command to display the restarting information of
the Slave Main Board (SMB) for the last 10 times.
The restarting time and possible causes are recorded.
To Next Page
Loading...
Need help?
General
