Huawei Quidway S1700 Series User Manual

Quidway S1700 Series Ethernet Switches
Web User Manual 5 VLAN Configuration
Issue 01 (2011-11-17) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
43
Figure 5-5 Configuring Static Members by Interface Range
2. Set the Interface type to display as Port or Trunk.
3. Enter an interface range.
4. Modify the VLAN parameters as required. Remember that the PVID, acceptable frame type,
and ingress filtering parameters for each interface within the specified range must be
configured on either the Edit Member by VLAN or Edit Member by Interface page. See Table
5-3, Table 5-4.
5. Click Apply.
Table 5-4 Parameters of Configuring Static Members by Interface Range
Title Description
Port Range Displays a list of port range (1-28).
Trunk Range Displays a list of Trunk range (1-12).
Withing the specified interface range, the PVID of every interface, Acceptable Frame Type,
and Ingress Filtering must be set in the page Edit/Show Member by VLAN and Edit/Show
Member by Interface.
----End
5.1.7 Show/delete Static VLAN
1. Click VLAN > Static. Select Show/Delete from the Action list to view static VLAN. See
Figure 5-6.

Huawei Quidway S1700 Series Specifications

General

Brand	Huawei
Model	Quidway S1700 Series
Category	Switch
Language	English