Huawei Quidway S1700 Series User Manual

Quidway S1700 Series Ethernet Switches
Web User Manual 10 Management
Issue 01 (2011-11-17) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
91
----End
10.1.2 Show/download log
To show the error messages logged to system or flash memory:
1. Click Administration, Log, System.
2. Select Show Logs from the Step list.
3. Click RAM to display log messages stored in system memory, or Flash to display messages
stored in flash memory.
Figure 10-2 Showing Error Messages Logged to System Memory
----End
10.1.3 Remote Log Configuration
Use the Administration > Log > Remote page to send log messages to syslog servers or other
management stations. You can also limit the event messages sent to only those messages
below a specified level.
To configure the logging of error messages to remote servers:
1. Click Administration, Log, Remote.
2. Enable remote logging, specify the facility type to use for the syslog messages. and enter the
IP address of the remote servers.
3. Click Apply.

Huawei Quidway S1700 Series Specifications

General

Brand	Huawei
Model	Quidway S1700 Series
Category	Switch
Language	English