Quidway S1700 Series Ethernet Switches
Web User Manual 10 Management
Issue 01 (2011-11-17) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
90
Figure 10-1 Configuring Settings for System Memory Logs
Table 10-1 Parameters of Configuring Settings for System Memory Logs
Title Description
System Log Status Enables/disables the logging of debug or error messages to the
logging process. (Default: enable)
Flash Level Limits log messages saved to the switch’s permanent flash memory
for all levels up to the specified level. For example, if level 3 is
specified, all messages from level 0 to level 3 will be logged to
flash. (Range: 0-7, Default: 3) Detailed Logging Level description,
please see Table 10-2.
RAM Level Limits log messages saved to the switch’s temporary RAM
memory for all levels up to the specified level. For example, if level
7 is specified, all messages from level 0 to level 7 will be logged to
RAM. (Range: 0-7, Default: 7) Detailed Logging Level
description, please see Table 10-2.
Table 10-2 Logging Levels
Level Severity Name Descriptin
7 Debugging Debugging messages
6 Informational Informational messages only
5 Notice Normal but significant condition, such as cold start
4 Warning Warning conditions (e.g., return false, unexpected return)
3 Error Error conditions (e.g., invalid input, default used)
2 Critical Critical conditions (e.g., memory allocation, or free memory
error - resource exhausted)
1 Alert Immediate action needed
0 Emergency System unusable
To Next Page
Loading...
Need help?
General