24
Auto Adding
1.
Tap
.
2.
Tap
Talker alias
, and then enable
Auto-add contacts
.
If the caller has enabled the
Send Talker alias
feature, your radio will automatically add the caller to the
contact list.
7.1.5 Editing or Deleting a Contact
1.
Tap or .
2.
Tap
Contacts
.
3.
Tap the contact, and then tap .
4.
Do either of the following:
Edit the contact information including avatar, name, radio ID, and phone number, and then tap .
Tap
Delete contact
to delete the contact, and then tap
OK
to confirm.
7.1.6 Sending the Caller Alias
1.
Tap
.
2.
Tap
Talker alias
, and then enable
Send talker alias
.
When initiating a private call, the radio sends its alias to the callee.
7.1.7 Managing Zones/Subgroups
Zone
In conventional mode, a zone is a group of channels within the same operational area.
Tap or , and then tap
Zone
. You can do either of the following:
Switch the channel
a.
Tap the zone.
b.
Tap on the right side of the channel to set it as the current channel.
Edit the channel
a.
Tap the channel, tap , and then do either of the following:
For the digital channel, edit
Roam list
,
Scan list
,
Preferred scan list
,
Contact
,
RX group list
, and
TX power
.
For the analog channel, edit
Scan list
,
TX power
, and
Squelch level
.